Corrosion Resistant Metal Chery QQ Spare Parts Fuel Pump Module Assembly

Chery Spare Parts Fuel Pump Module Assembly Suitable For Chery QQ/QQ6/A3

Chery Spare Parts Adavantage:

1. Function:

1). The spring has a strong bearing pressure to avoid the pump body from being damaged and ruptured by extrusion

2). Telescopic hose and cold shrink hose to prevent pressure relief

3). SUsing high-quality pump core, fuel is more sufficient, more fuel-efficient, so that you can rest assured

4). The original fuel pressure valve can make the car more powerful, and it is also very easy to start a cold car

5). The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers

6). The oil inlet and return pipes have excellent permeability and are dredged and stable (be careful not to install the pipes of the original vehicle in reverse when installing)

7). Original wiring harness plug, the original car position plug, the plug is not easy to fall off, strong conductivity

8). Our pump casing has excellent high temperature resistance and corrosion resistance, and is not easy to break

9). Solve the problems of insufficient vehicle power, easy flameout, and inaccurate fuel gauge

2. Effect:

As the most basic component of the engine fuel supply system, the fuel pump is responsible for pumping fuel out of the fuel tank during the working process of the engine, and continuously delivering it to the engine through the fuel supply pipeline at a certain pressure, and then the high-pressure fuel pump Secondary pressurization, and provides a fixed amount of fuel for each cylinder in accordance with the engine's work sequence.

3. Instal:

1). Prepare related tools
2). Place the vehicle on the indoor level ground; place the ignition switch in the OFF position; pull on the parking brake, install the wheel block, clean up the debris in the vehicle, and place the fire extinguisher in an easy-to-reach place!
3). Remove the rear seat cushion;
4). After disassembling the manhole cover (pry up gently, do not use brute force, the wiring harness is connected underneath);
5). Disconnect the cable from the negative terminal of the battery, and remember to wrap the unplugged tubing with plastic wrap to prevent dirt from entering. Remember the original installation position;

6). Depressurization of the fuel system, method: disconnect the power supply of the fuel pump, start the engine several times and it will be OK;

7). Clean the upper and edges of the fuel pump assembly (there is a lot of dirt, you can wipe it off with a rag);

8). Disassemble the fuel pump

① Using a screwdriver with protective tape on the head, unhook the two claws to remove the No. 1 suction pipe bracket

② Using a screwdriver with a protective tape on the head, disengage the two claws on the fuel pressure regulator, disengage the claws on the fuel pump filter bracket, and remove the fuel pump filter.

③ Disconnect the fuel pump filter hose

④ Take out the fuel pump, press the lower locking buckle with your hand, disconnect the fuel pump wiring harness, remove the fuel pump O-ring, and place the fuel pump in the clean parts tray

⑤ Take out the wiring harness from the fuel suction pipe assembly

⑥ Pry out the fuel pressure regulator with a screwdriver with protective tape on the head, and remove the two O-rings from the pressure regulator assembly. Place in the clean parts tray

9). Steps to restore during installation, you need to check:

Check whether the fuel pump is leaking

Fuel pump pressure check

Manhole cover after installation

Install the rear seat cushion

Chery Spare Parts Details:

Chery Spare Parts Discription:

Chery Spare Parts FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in Bubble Inside and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB.
Q4. How about your delivery time?
A: Generally, it will take 20 to 40 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.